If you’re looking to Sell Anritsu MS2724B HandHeld Spectrum Master Analyzer

MS2724B
Spectrum Master™

The Anritsu MS2724B is the most advanced ultra-portable spectrum analyzer  on the market, featuring unparalleled performance at a modest price.

Introduction
Continuous frequency coverage from 9 kHz to 20 GHz gives the wireless professional the performance needed  for the most demanding measurements in harsh RF and physical environments. Whether you need spectrum monitoring, WiFi and WiFi5 installation and testing, RF and microwave signal  measurements or cellular signal measurements, the MS2724B Spectrum Master is the tool to make your job easier  and more productive.

High Performance Highlights
• 9 kHz to 20 GHz Input
• 1 Hz to 3 MHz RBW Range
• Very Low Phase Noise (–104 dBc/Hz typical at 10 kHz offset at 2 GHz)
• Built-in AM/FM/SSB Demodulator
• Built-in Preamplifier
• 65 dB Step Attenuator
• True RMS Detection
• 2+ Hours of Battery Life
• 3.4 kg (7.5 lb)
• 3G Modulation options
• GPS Receiver option
• Quasi-peak detector and CISPR bandwidths

Features and Options

Functions

• Multiple Marker: Display up to six markers on screen. Eachmarker includes a delta marker, effectively allowing up to 12 markers on screen. The user may also set marker 1 to be the reference for 6 delta markers.
• Marker Table: Display a table of up to six marker frequency and amplitude values plus delta marker frequency offset and amplitude.

Upper/Lower Limit

• Fixed and segmented: Each upper and lower limit can be made up of between one and 40 segments.

Smart Measurements

• Occupied Bandwidth: Measures 99% to 1% power channel of a signal. Channel Power: Measures the total power in a specified bandwidth.
• C/I: Measures carrier to interference ratio.
• ACPR: Measures power levels in the channels immediately above and  below the center channel.
• Field Strength: Uses antenna calibration tables to measure dBm/meter2or dBmV/meter.

Buying, Selling, Trading Anritsu MS2724B

If you’re selling your Anritsu MS2724B please fill out form on the right hand side of page.

If you’re looking to Sell Anritsu MS2711D HandHeld Spectrum Master Analyzer

SPECTRUM ANALYSIS – ANYWHERE, ANYTIME

Covering the 100 kHz to 3.0 GHz frequency range, with a built in standard pre-amplifier, the MS2711D handheld spectrum analyzer is the proven solution for installing, provisioning, maintaining and troubleshooting wireless systems and RF frequency spectrum interference issues. This portable spectrum analyzer features a built-in standard preamplifier in a compact, handheld design that can go “anywhere, anytime” with no backpack required. Ideal for field environments and applications that require mobility, such as site surveys and on-site system testing.

The Anritsu Spectrum Master is a synthesizer-based hand held spectrum analyzer that provides quick and accurate signal results. Measurements can be easily made by using the main instrument functions: frequency, span, amplitude and bandwidth. Dedicated keys for common functions and a familiar calculator-type keypad are available for fast data entry.
Automatic time and date stamping of measurement data of up to 300 results is provided as is storage and recall of up to 10 measurement setups. A large, daylight-viewable TFT color display provides easy viewing in a variety of lighting conditions. The Anritsu Spectrum Master is capable of up to one and one-half hours of continuous operation from a fully
charged battery and can be operated from an external power source (which also simultaneously charges the battery). Built-in energy conservation features can be used to extend battery life over an eight-hour workday.

The Anritsu Spectrum Master is designed for monitoring, measuring, and analyzing signal environments. Typical measurements include: in-band interference, transmit spectrum analysis, antenna isolation and cell area interference. A full range of marker capabilities such as peak, center and delta functions are provided for faster, more comprehensive
measurement of displayed signals. Multiple limit lines are available for creating quick, simple pass/fail measurements. A menu option provides for an audible beep when the limit value is exceeded.

Performance Specifications

Frequency

• Frequency Range 100 kHz to 3 GHz (tunable to 9 kHz)
• Frequency Reference Aging Accuracy :1 ppm/yr
• Frequency Span: 10 Hz to 2.99 GHz in 1, 2, 5 step selections in auto mode, plus zero span
• Sweep Time  1.1s full span; 50s to 20s, selectable in zero span
• SSB Phase Noise –75 dBc/Hz, 30 kHz offset @ 1 GHz
• Spurious Responses Input Related  45 dBc
• Spurious Residual Responses 90 dBm, 10 kHz RBW, pre-amp on

Resolution Bandwidth

• Selections 100 Hz to 1 MHz in 1-3 sequence
• Accuracy Video Bandwidth 5% typical Selection Accuracy 3 Hz to 1 MHz in 1-3 sequence 5%

Amplitude

• Measurement Range Maximum Input Level +20 dBm to –135 dBm +43 dBm, peak, without damage 50 VDC
• Displayed Average Noise Level: –135 dBm typical, 10 MHz; –115 dBm typical, <10 MHz (input terminated, 0 dB attenuation, RMS detection, 100 Hz RBW, preamp on)
• Dynamic Range > 65 dB
• Total Level Accuracy 1.5 dBm max (1 dBm typical) >10 MHz to 3 GHz 2 dBm typical <10 MHz for input signal levels –60 dBm (excludes input VSWR mismatch)

Amplitude Units

• Scale Mode dBm, dBV, dBmV, dBuV, V, W
• Log Display 1 to 15 dB/division, in 1 dB steps, 10 divisions displayed
• Linear Display 10 divisions
• Attenuator Range: 0 to 51 dB, selected manually or automatically coupled to the reference level. Resolution in 1 dB steps.

Buying, Selling, Trading Anritsu MS2711D

General Specifications:

Dimensions

•   10 7 2.4 inches 25.4 17.8 6.1 centimeters

Weight base model:

• 4.5 pounds (2.02 kg) including battery with all options: 4.9 pounds (2.2 kg) including battery

Power Requirements:

•  NiMH battery: 10.8 volts, 1800 mAh External DC input: +12 to +15 Vdc, 3A max.

Temperature Operating:

•  –10 to +50C, 85% or less humidity Non-operating: –20 to +75C

Electromagnetic Compatibility:

• Meets European community requirements for CE marking

Safety

• Conforms to EN 61010-1 for Class 1 portable equipment

If you’re selling your Anritsu MS2711D please fill out form on the right hand side of page.

If you’re looking to Sell HP Hewlett Packard 8591A Spectrum Analyzer

Hewlett Packard 8591A 9 kHz – 1.8 GHz Spectrum Analyzer,

The 8591A Spectrum Analyzer covers the range from 1 MHz to 1.8 GHz with a center frequency accuracy of 210 Hz at 1 GHz. Over 100 functions are controlled either from the front panel. Advanced marker functions measure: the 99% power bandwidth of a signal; the 3 dB points of a signal; frequency; amplitude; amplitude and frequency differences on a signal; and highest peaks on a signal. The Next Peak button moves the marker to the next highest signal, simplifying harmonic measurements. Other measurement functions include: percentage AM; signal-to-noise ratio; and the FFT. Store/recall up to nine complete front-panel states in battery-backed RAM.

This unit has the following specifications:

Frequency Range: 1 MHz to 1.8 GHz
Frequency Span Range: 0 Hz (zero span), 10 kHz to 1.8 GHz
Amplitude Range: -63 to +75 dBmV
Impedance: 75 ohm

Standard Features
These performance analyzers share the same ease-of-use features found in the lower-cost HP 8590B and 8592B.  In addition, each performance portable comes with a built-in memory card reader that enables you to load HP’s custom measurement personalities and measurement data into the spectrum analyzer using 32-Kbyte memory cards. A catalog function allows you to determine the exact content of information stored on your memory cards or within internal memory.

Buying, Selling, Trading HP Hewlett Packard 8591A
If you’re selling your HP Hewlett Packard 8591A please fill out form on the right hand side of page.

If you’re looking to Sell Anritsu MS2721A HandHeld Spectrum Master Analyzer

The Anritsu MS2721A is the most advanced ultra-portable spectrum analyzer on the market, featuring unparalleled performance and size at a modest price. This is a high performance handheld spectrum analyzer. The MS2721A is the first fully-functional handheld spectrum analyzer designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems. The MS2721A is ideal for AM and FM broadcast proofing because the wide dynamic range, makes NRSC measurements on analog or IBOC signals easy with no need for an external carrier notch filter. The MS2721A is a small and easy to use portable spectrum analyzer with unprecedented measurement capability for applications up to 7.1 GHz. Weighing in at less than 7 pounds, it is equally at home on the engineering bench and in the field.

Spectrum Master model MS2721A is an entirely new instrument for deploying, maintaining and troubleshooting wireless base stations and Wi-Fi (802.11a, b and g) systems. Options add spectrogram, signal strength and RSSI. There is an option to add user definable channel scanner option that is excellent for interference mitigation work in complicated RF environments

Several smart measurements are built into the MS2721A, including channel power, adjacent channel power ratio, Carrier to Interference ratio (C/I), and field strength. In addition, an AM/FM/SSB demodulator is included. Demodulated signals can be monitored using the internal speaker or by using a universal 2.5 mm 3-wire headset, such as used with many cellular telephones.

The MS2721A spectrum analyzer has low phase noise of -100 dBc/Hz @ 10 kHz offsets, best in its class typical DANL of -153 dBm at 1 GHz, resolution bandwidth (RBW) range of 10 Hz to 3 MHz and video bandwidth (VBW) range of 1 Hz to 3 MHz. It also has the fastest sweep speeds of any spectrum analyzer in its class.

The use of external Compact Flash memory modules up to 512 MB allows an unlimited number of traces and setups to be stored. Measurements may be stored directly to the compact flash module. A 512 MB module will hold over 20,000 measurements. Remote programming using the Ethernet 10/100 Base-T connection is provided using SCPI programming. Both the Ethernet connection and the USB 2.0 connection give the user flexibility in remotely operating the instrument using Anritsu’s remote access software, shipped with the product. Measurements and setups may be uploaded and downloaded using either the Ethernet or the USB connection.

Buying, Selling, Trading Anritsu MS2721A

Features:

* 10 Hz to 3 MHz RBW range
* Very low phase noise (–100 dBc/Hz maximum at 10 kHz offset at 7.1 GHz)
* Built-in preamplifier
* 65 dB step attenuator
* Input protected to 20 watts
* True RMS detection
* Built-in AM/FM/SSB demodulator
* 3+ hours of battery life
* 2.9 kg (<6.4 lbs)

If you’re selling your Anritsu MS2721A please fill out form on the right hand side of page.

If you’re looking to Sell Anritsu MS2711D HandHeld Spectrum Master Analyzer

SPECTRUM ANALYSIS – ANYWHERE, ANYTIME

Covering the 100 kHz to 3.0 GHz frequency range, with a built in standard pre-amplifier, the MS2711D handheld spectrum analyzer is the proven solution for installing, provisioning, maintaining and troubleshooting wireless systems and RF frequency spectrum interference issues. This portable spectrum analyzer features a built-in standard preamplifier in a compact, handheld design that can go “anywhere, anytime” with no backpack required. Ideal for field environments and applications that require mobility, such as site surveys and on-site system testing.

The Anritsu Spectrum Master is a synthesizer-based hand held spectrum analyzer that provides quick and accurate signal results. Measurements can be easily made by using the main instrument functions: frequency, span, amplitude and bandwidth. Dedicated keys for common functions and a familiar calculator-type keypad are available for fast data entry.
Automatic time and date stamping of measurement data of up to 300 results is provided as is storage and recall of up to 10 measurement setups. A large, daylight-viewable TFT color display provides easy viewing in a variety of lighting conditions. The Anritsu Spectrum Master is capable of up to one and one-half hours of continuous operation from a fully
charged battery and can be operated from an external power source (which also simultaneously charges the battery). Built-in energy conservation features can be used to extend battery life over an eight-hour workday.

The Anritsu Spectrum Master is designed for monitoring, measuring, and analyzing signal environments. Typical measurements include: in-band interference, transmit spectrum analysis, antenna isolation and cell area interference. A full range of marker capabilities such as peak, center and delta functions are provided for faster, more comprehensive
measurement of displayed signals. Multiple limit lines are available for creating quick, simple pass/fail measurements. A menu option provides for an audible beep when the limit value is exceeded.

Performance Specifications

Frequency

Frequency Range 100 kHz to 3 GHz (tunable to 9 kHz)
Frequency Reference Aging Accuracy :1 ppm/yr
Frequency Span: 10 Hz to 2.99 GHz in 1, 2, 5 step selections in auto mode, plus zero span
Sweep Time 1.1s full span; 50s to 20s, selectable in zero span
SSB Phase Noise –75 dBc/Hz, 30 kHz offset @ 1 GHz
Spurious Responses Input Related 45 dBc
Spurious Residual Responses 90 dBm, 10 kHz RBW, pre-amp on

Resolution Bandwidth

Selections 100 Hz to 1 MHz in 1-3 sequence
Accuracy Video Bandwidth 5% typical Selection Accuracy 3 Hz to 1 MHz in 1-3 sequence 5%
Amplitude

Measurement Range Maximum Input Level +20 dBm to –135 dBm +43 dBm, peak, without damage 50 VDC
Displayed Average Noise Level: –135 dBm typical, 10 MHz; –115 dBm typical, 65 dB
Total Level Accuracy 1.5 dBm max (1 dBm typical) >10 MHz to 3 GHz 2 dBm typical Amplitude Units

Scale Mode dBm, dBV, dBmV, dBuV, V, W
Log Display 1 to 15 dB/division, in 1 dB steps, 10 divisions displayed
Linear Display 10 divisions
Attenuator Range: 0 to 51 dB, selected manually or automatically coupled to the reference level. Resolution in 1 dB steps.

Buying, Selling, Trading Anritsu MS2711D
General Specifications:

Dimensions

10 7 2.4 inches 25.4 17.8 6.1 centimeters

Weight base model:

4.5 pounds (2.02 kg) including battery with all options: 4.9 pounds (2.2 kg) including battery

Power Requirements:

NiMH battery: 10.8 volts, 1800 mAh External DC input: +12 to +15 Vdc, 3A max.

Temperature Operating:

–10 to +50C, 85% or less humidity Non-operating: –20 to +75C

Electromagnetic Compatibility:

Meets European community requirements for CE marking

Safety

Conforms to EN 61010-1 for Class 1 portable equipment

If you’re selling your Anritsu MS2711D please fill out form on the right hand side of page.

If you’re looking to Sell Rohde & Schwarz FSH6 Handheld Spectrum Analyzer

Rohde & Schwarz FSH6 Handheld spectrum analyzer 100 kHz – 6 GHz, RBW 100 Hz -1 MHz, LCD color display, preamplifier

The Rohde & Schwarz FSH6 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of “super-heterodyne receiver” to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz FSH6. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Rohde & Schwarz FSH6 Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Rohde & Schwarz FSH6 spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Rohde & Schwarz FSH6 spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

The FSH is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station up to on-site fault location in RF cables as well as development and service -an extensive range of applications. Due to its excellent characteristics, the FSH is used on board the International Space Station (ISS) for distance-to-fault measurements on RF antenna cables.

Features

• Frequency range 100 kHz to 6 GHz
• Internal preamplifier with frequency range from 100 kHz to 6 GHz
• Displayed average noise level typ. -135 dBm (RBW 100 Hz)
• 0.5 dB typ. level accuracy up to 6 GHz
• Resolution bandwidths 100 Hz to 1 MHz, 1 and 3 steps
• Wide range of detectors: sample, max/min peak, auto peak, RMS

The Rohde & Schwarz FSH Series is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions to handle anything from the installation or maintenance of a mobile radio base station, to on-site fault location in RF cables, to development and service.

TDMA Power Measurements

The FSH performs time-domain power measurements within a timeslot of TDMA (time division multiple access) methods. All the settings required for the GSM and EDGE standards are predefined to make these measurements easier for the user. In addition, up to five user-definable instrument setups can be loaded into the FSH using the FSH View software.

Channel-Power Measurements

The channel-power measurement function is for determining the power in a transmission channel specified by the user. After a few preliminary settings have been made, a single keystroke starts the FSH’s spectrum measurement inside the channel, using a resolution bandwidth that is small relative to the channel bandwidth. The FSH then integrates the measured values indicated by the trace to obtain and display the total power. All the settings required for the digital mobile radio standards 3GPP WCDMA, cdmaOne, CDMA2000 1x are predefined ready for use. The FSH also takes the characteristics of the selected display mode (lin or log), the selected detector and the resolution bandwidth into account so that the result accuracy is comparable to that obtained with a thermal power meter.

Measurements on Cables (distance-to-fault)

For rapid and accurate determination of the distance to any faults in an RF cable. Distance-to-fault measurements using the VSWR Bridge FSH-Z2 give an immediate overview of the state of the device under test (return loss and distance). The marker-zoom function allows detailed analysis of faults with a resolution of up to 1024 pixels.

Requires FSH313/323/626 (with built-in tracking generator), option FSH-B1 (distance-to-fault measurement) and FSH-Z2 (VSWR bridge and power divider).

Scalar Network Analysis

The FSH313/323/626 (with built-in tracking generator) can be used to determine the transmission characteristics (i.e. attenuation or gain) of two ports such as cables, filters, amplifiers, etc, rapidly and with a minimum of effort. A simple calibration procedure compensates for the attenuation introduced by measurement cables or any attenuators used for amplifier measurements. When the VSWR Bridge FSH-Z2 is attached, the matching (return loss or VSWR) at the input or output of two ports can be determined as well as their transfer function. The bridge is screwed directly onto the RF input and tracking generator output, and no extra or cumbersome cabling is required.

Buying, Selling, Trading Rohde & Schwarz FSH6

If you’re selling your Rohde & Schwarz FSH6 please fill out form on the right hand side of page.

If you’re looking to Sell Rohde & Schwarz FSH18 Handheld Spectrum Analyzer

Rohde and Schwarz FSH18 10 MHz to 18 GHz Handheld Spectrum Analyzer

 Features

• Frequency range: 10 MHz to 18 GHz
• Displayed average noise level typical -128 dBm
  (RBW 100 Hz, 3 GHz to 6 GHz)
• Level accuracy of 1.5 dB (20 MHz to 6 GHz)
• Best in class functionality
• Easy menu-based operation
• Over 3 hours of battery life
• Color display and sunlight mode for enhanced visibility
• High measurement accuracy

Applications

• Service and maintenance of microwave applications
• Universal lab applications up to 18 GHz
• Field strength measurements
• Detection of interferer signals
• Signal monitoring
• Maintenance, service and operation
• Educational institutions and research laboratories
• Military and government applications

The R&S FSH18, with a frequency range of 10 MHz to 18 GHz, is perfect for field applications including testing of microwave signals, field strength measurements and signal monitoring.  FSH18 comes in the same size and weight as the R&S FSH3 and R&S FSH6 handheld spectrum analyzers.

The R&S FSH18 can characterize signals of radar stations, air traffic control systems, satellite systems, and microwave links – and simultaneously detect interfering signals. With its long battery operating time of up to three hours and robust design, it is especially valuable for outdoor use. Since it only weighs 2.5 kg, it can be easily carried over longer distances and also on difficult terrain. The R&S FSH18 can also be used in the lab for general measurement tasks up to 18 GHz. Moreover, the R&S FSH models are the only handheld spectrum analyzers worldwide that are able to perform high-precision terminating power measurements as well as directional power measurements by means of external power sensors, thus eliminating the need for an additional power meter during field applications.

Buying, Selling, Trading Rohde & Schwarz FSH18

Like the R&S FSH3 and R&S FSH6 models, the R&S FSH18 excels with high measurement accuracy of up to 1.5 dB. In addition to a resolution bandwidth of 100 Hz to 1 MHz, the R&S FSH18 features an inherent noise of typically –148 dBm at a bandwidth of 1 Hz in the range between 3 GHz and 6 GHz. Its simple menu-based operation and predefined measurement functions such as for channel power, electric field strength, and carrier/noise ratio (C/N) make it easy to use.

Rohde and Schwarz FSH18 Product Overview

If you’re selling your Rohde & Schwarz FSH18 please fill out form on the right hand side of page.

If you’re looking to Sell Rohde & Schwarz FSH3 Handheld Spectrum Analyzer

Rohde & Schwarz FSH3.23 100 kHz – 3 GHz Handheld Spectrum Analyzer with Tracking Generator, and Preamp

The Rohde & Schwarz FSH3 is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station, through on-site fault location in RF cables to development and service – an extensive range of applications.

Features:

• 100 kHz to 3 GHz
• Internal tracking generator (FSH313/323)
• Robust edge protection, stable carrying handle
• Easy operation
• Four hours operating time on battery power
• Storage of up to 100 traces and setups
• Easy data transfer to PC
• High measurement accuracy
• Best RF characteristics in this class
• Only 6.7″W x 4.7″D x 10.6″H and 5.5 lbs.

Buying, Selling, Trading Rohde & Schwarz FSH3

Applications

• General lab use
• Cable installation and maintenance
• Verify production line equipment
• General field use for communications
  installation and maintenance
• Field wireless equipment installation
  and maintenance

C/N Measurement

The R&S FHS 3.23 offers a carrier/noise (C/N) measurement for determining the ratio of carrier power to noise power or carrier power to noise power density. The R&S FHS 3.23 supports three different modes for carrier power measurement. In the CW TX mode, the R&S FHS 3.23 determines the power of an unmodulated carrier. In the digital TX mode, it determines the channel power of a reference channel, as is common with digitally modulated carriers (e.g. the DAB, DVB, DVB-T, DVB-H and J.83/A/B/C standards). Furthermore, the ATSC standard for digital terrestrial television with 8VSB modulation is supported. In the analog TV mode, the R&S FSH measures the peak power of the vision carrier with amplitude-modulated TV signals.

Channel-power measurements
The channel-power measurement function is for determining the power in a transmission channel specified by the user. After a few preliminary settings have been made, a single keystroke starts the R&S FSH 3.23 spectrum measurement inside the channel, using a resolution bandwidth that is small relative to the channel bandwidth.

The R&S FSH 3.23 then integrates the measured values indicated by the trace to obtain and display the total power. All the settings required for the digital mobile radio standards 3GPP WCDMA, cdmaOne, CDMA2000 1x are predefined ready for use.

Rohde & Schwarz FSH3 Specifications:

If you’re selling your Rohde & Schwarz FSH3 please fill out form on the right hand side of page.

If you’re looking to Sell Rohde & Schwarz FSH6 Handheld Spectrum Analyzer

Rohde & Schwarz FSH6 Handheld spectrum analyzer 100 kHz – 6 GHz, RBW 100 Hz -1 MHz, LCD color display, preamplifier

The Rohde & Schwarz FSH6 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of “super-heterodyne receiver” to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Rohde & Schwarz FSH6. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

Some applications for Rohde & Schwarz FSH6 Spectrum Analyzers include Site Monitoring: Verify that the frequency and signal strength of your transmitter is accurate. Interference: Before a system is installed you use a Rohde & Schwarz FSH6 spectrum analyzer to verify that the frequencies (you plan to use) are not occupied or if the presence of a very strong signal will interfere with your new setup. Interference can be created by a number of different situations. Other tests that utilize the Rohde & Schwarz FSH6 spectrum analyzer features include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.

The FSH is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station up to on-site fault location in RF cables as well as development and service -an extensive range of applications. Due to its excellent characteristics, the FSH is used on board the International Space Station (ISS) for distance-to-fault measurements on RF antenna cables.

Features

• Frequency range 100 kHz to 6 GHz
• Internal preamplifier with frequency range from 100 kHz to 6 GHz
• Displayed average noise level typ. -135 dBm (RBW 100 Hz)
• 0.5 dB typ. level accuracy up to 6 GHz
• Resolution bandwidths 100 Hz to 1 MHz, 1 and 3 steps
• Wide range of detectors: sample, max/min peak, auto peak, RMS

The Rohde & Schwarz FSH Series is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions to handle anything from the installation or maintenance of a mobile radio base station, to on-site fault location in RF cables, to development and service.

TDMA Power Measurements

The FSH performs time-domain power measurements within a timeslot of TDMA (time division multiple access) methods. All the settings required for the GSM and EDGE standards are predefined to make these measurements easier for the user. In addition, up to five user-definable instrument setups can be loaded into the FSH using the FSH View software.

Channel-Power Measurements

The channel-power measurement function is for determining the power in a transmission channel specified by the user. After a few preliminary settings have been made, a single keystroke starts the FSH’s spectrum measurement inside the channel, using a resolution bandwidth that is small relative to the channel bandwidth. The FSH then integrates the measured values indicated by the trace to obtain and display the total power. All the settings required for the digital mobile radio standards 3GPP WCDMA, cdmaOne, CDMA2000 1x are predefined ready for use. The FSH also takes the characteristics of the selected display mode (lin or log), the selected detector and the resolution bandwidth into account so that the result accuracy is comparable to that obtained with a thermal power meter.

Measurements on Cables (distance-to-fault)

For rapid and accurate determination of the distance to any faults in an RF cable. Distance-to-fault measurements using the VSWR Bridge FSH-Z2 give an immediate overview of the state of the device under test (return loss and distance). The marker-zoom function allows detailed analysis of faults with a resolution of up to 1024 pixels.

Requires FSH313/323/626 (with built-in tracking generator), option FSH-B1 (distance-to-fault measurement) and FSH-Z2 (VSWR bridge and power divider).

Scalar Network Analysis

The FSH313/323/626 (with built-in tracking generator) can be used to determine the transmission characteristics (i.e. attenuation or gain) of two ports such as cables, filters, amplifiers, etc, rapidly and with a minimum of effort. A simple calibration procedure compensates for the attenuation introduced by measurement cables or any attenuators used for amplifier measurements. When the VSWR Bridge FSH-Z2 is attached, the matching (return loss or VSWR) at the input or output of two ports can be determined as well as their transfer function. The bridge is screwed directly onto the RF input and tracking generator output, and no extra or cumbersome cabling is required.

Buying, Selling, Trading Rohde & Schwarz FSH6

If you’re selling your Rohde & Schwarz FSH6 please fill out form on the right hand side of page.